Brands |
N/A Magna™ Posi-flate® |
Inlet/Outlet Size |
N/A 1/2 in |
Inlet/Outlet Type |
N/A National Pipe Thread (NPT) |
Pressure Rated |
N/A 200 psig |
Maximum Operating Temperature |
N/A 150 ºF |
Material |
N/A Nylon |
Parts List |
N/A
Removable Top Cap Magna™ Setpoint Dial Magna™ Body O-Ring, Plunger Plunger O-Ring, Shut-Off O-Ring, Bottom Cap Removable Bottom Cap |
Hundreds of Applications |
N/A Available in light-weight impact resistant nylon, the Magna™ Flow Control Valve offers superior strength and corrosion resistance, making it ideal for use in hundreds of different applications. Simplicity of construction, with removable top and bottom caps, provides easy disassembly for cleaning or maintenance without removing the valve from service. Proven O-ring seals provide a positive zero leak shut-off. Replacement of seals, if required, is quick and easy because disassembly is simple and fast. The Magna™ Flow Control Valve offers all these features at a very affordable price. |
Features |
N/A
|
How The Magna™ Flow Control Valve Works |
N/A
The Magna™ Flow Control Valve is simple to operate from a fully closed position to a fully open position, by turning the micrometer dial clockwise to close and counter-clockwise to open. The Magna™ Valve is only fully closed when the micrometer dial indicates the OFF position. From the OFF position to ZERO, or when flow begins, is about two turns counter-clockwise. Each successive full turn from zero will yield 100 Magna™ setpoints, as indicated on the micrometer dial. The Magna™ Valve is fully open when the micrometer dial reads 1100 Magna™. A flow indicator on the side of the Magna™ Valve indicates the direction of flow to achieve the best performance. A bottom cap is easily removed for inspection and/or for removing any foreign material which may block the outlet port. The Series 608, 700 and 808 valves have the same physical dimensions and 1/2" NPT inlet and outlet ports. On the Series 700 and 808 valve, internal porting differences allow even more precise settings when high flows are not required. |
Linear Flow Offers Precise Metering |
N/A Because of the linear flow characteristics of the Magna™ Flow Control Valve, determining precise flow results is easy. Unlike most flow control valves, the Magna™ flow curve is a relatively straight line curve. Therefore, any time a Magna™ setting is doubled, the flow is predictably doubled as well. For instance, if a Magna™ setting of 300 yields a flow of 75 SCFM, then changing the Magna™ setting to 600 will yield a flow of 150 SCFM. This applies to both gas and liquid flows. |
